With the 424CO, elobau has developed a CAN-capable angle sensor pursuant to ISO 11898 with CANopen protocol. Its measuring principle is based on a Hall sensor which registers the changes of the magnetic field and outputs a corresponding signal. This means the sensor is contactless, which makes it extremely reliable and contributes to its long service life.
The 424CO angle sensor offers a measurement range of 360° with of a resolution of 0.1° and a linearity error of less than 1° over the entire angular range. Its rotational axis is plain-bearing and can thus handle smaller radial forces. This predestines it for almost any application. Due to high protection class IP67, the sensor can be used with great success even under tough environmental conditions. The recommended temperature range is between -40 and +85 degrees. Due to its EMC resistance (field withstand 200 V/m according to ISO 11452-5) and the CAN output, the sensor is also suitable for use in the automotive sector.
Various specifications such as the baud rate or direction of rotation can optionally be configured via the CANopen protocol. elobau also provides suitable cable sets or operating levers on request. The unit is connected via a Deutsch plug.
- Norman L Wellings9/27/2019 15:53 o’clockwhere can I buy one of the 424D we are short 2 to finish our production.
I need your help our supplier cannot seem to help us.
- Daniel Gabur9/30/2019 05:49 o’clockDear Norman,
You can send a direct request by using the contact form or you can call our sales team directly.
At the page "contact" (upper right corner in the menue bar) you'll find the responsible person and contact details.
- Daniel Ionescu2/26/2021 22:15 o’clockwhere can I buy one of the 424 S06 A08001 KT 00562.
I need your help .
- Jens Weder3/15/2021 16:23 o’clockDear Daniel,
you can send a direct request by using the contact form or you can call our sales team directly.
At the page “contact” (upper right corner in the menue bar) you’ll find the responsible person and contact details.