Pular para o conteúdo
We are climate neutral since 2010

Relé de segurança 46212

Disponível no elostore

Relé de segurança 46212

Disponível no elostore
  • PLe/SIL3/Cat.4
  • Tensão de alimentação 24V AC / DC
  • Conexão para 4 sensores NA/NF
  • Função de monitoramento dos contatores (EDM)
  • Design compacto
  • 1 saída de segurança de relé sem potencial SIL3/PLe/Cat.4
  • 1 saída de controle de comutação sem potencial
  • LEDs para indicação de status de funcionamento e falha

Devido ao design compacto do relé de segurança modelo 4621273E o mesmo pode ser aplicado em painéis de controle com restrição de espaço de montagem.

Este relé de segurança oferece uma saída de segurança sem potencial SIL3 / PLe de até 4A e uma saída de controle com contatos reversíveis de até 3A. Até 4 sensores com contatos NA/NF podem ser conectado a este relé. O uso de extensões de entrada (interfaces) não é possível. Devido à tensão de alimentação de 24 V AC e DC, a unidade pode ser usada em uma ampla gama de aplicações.

O relé de segurança 4621273E pode ser usado como substituto compatível  para os modelos de relés de segurança abaixo descritos:

462121E1
462121E1U (Nota: tempo de comutação diferente)
462121E101
462121E1U1 (Nota: tempo de comutação diferente)
462121E104
462124E1 (Nota: tensão AC 230 V)
462124E1U (Nota: tensão AC 230 V e tempo de comutação diferente)
462121H1
462121H1U (Nota: tempo de comutação diferente)
462121H5
462121H5U (Nota: tempo de comutação diferente)

Exemplos de circuitos estão disponíveis na elobau mediante solicitação.

Este produto também está disponível em nossa elo.store.

Desenho técnico

1/2
Cat_MS_SAE_4621273E_DRW_opt
Tela cheia
1/2
2/2
Cat_MS_SAE_4621273E_CD_opt
Tela cheia
2/2

Article characteristics

  • Electrical data
  • 4621273E
  • Electrical data
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching current at safety output
  • Max. switching current at control output
  • Max. switching power at safety output
  • Max. switching power at control output
  • Max. switching power at safety output
  • Max. switching power at control output
  • Number of relay safety outputs
  • Number of relay control outputs
  • Number of redundant safety inputs
  • Stop category 0 (STO) nach IEC 61800-5-2
  • Stop category 1 (SS1) nach IEC 61800-5-2
  • EDM/start input
  • Start function
  • Utilization category
  • Operating voltage min.
  • Operating voltage max.
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Power consumption
  • Cross-short detection
  • LED display
  • Operating time
  • Min. switching voltage at safety output
  • Min. switching voltage at safety output
  • Min. switching current at safety output
  • Min. switching power at safety output
  • Min. switching power at safety output
  • Turn-on delay (ton)
  • Turn-off delay (toff)
  • Max no operating cycles at 0.5A switching current (ohmic load)
  • Max no operating cycles at 3A switching current (ohmic load)
  • Overvoltage category
  • Fuse operating voltage
  • Fuse safety output
  • Internal electronic fuse
  • Contact form
  • Power consumption
Attribute4621273E
Bestellung
Bestellung
Max. switching voltage at safety output 30 V DC
Max. switching voltage at control output 30 V DC
Max. switching voltage at safety output 250 V AC
Max. switching voltage at control output 250 V AC
Max. switching current at safety output 4 A
Max. switching current at control output 3 A
Max. switching power at safety output 120 W
Max. switching power at control output 90 W
Max. switching power at safety output 1000 VA
Max. switching power at control output 750 VA
Number of relay safety outputs 1
Number of relay control outputs 1
Number of redundant safety inputs 4
Stop category 0 (STO) nach IEC 61800-5-2 yes
Stop category 1 (SS1) nach IEC 61800-5-2 no
EDM/start input yes
Start function automatic
Utilization category AC-15 / DC-13
Operating voltage min. 21.6 V DC
Operating voltage max. 26.4 V DC
Operating voltage min. 21.6 V AC
Operating voltage max. 26.4 V AC
Current consumption 200 mA
Power consumption 5.28 W
Cross-short detection yes
LED display Yes
Operating time 10000 ms
Min. switching voltage at safety output 10 V DC
Min. switching voltage at safety output 10 V AC
Min. switching current at safety output 0.01 A
Min. switching power at safety output 0.1 W
Min. switching power at safety output 0.1 VA
Turn-on delay (ton) 100 ms
Turn-off delay (toff) 50 ms
Max no operating cycles at 0.5A switching current (ohmic load) 370000
Max no operating cycles at 3A switching current (ohmic load) 180000
Overvoltage category III
Fuse operating voltage 1A fast
Fuse safety output 4A slow blow
Internal electronic fuse no
Contact form NO/NC
Power consumption 5.28 VA
  • Mechanical data
  • 4621273E
  • Mechanical data
  • Dimensions
Attribute4621273E
Bestellung
Bestellung
Dimensions 75 x 47 x 92 mm (H/B/T)
  • Material information
  • 4621273E
  • Material information
  • Housing material
  • Housing colour
Attribute4621273E
Bestellung
Bestellung
Housing material PBT GF30
Housing colour schwarz
  • Environmental conditions
  • 4621273E
  • Environmental conditions
  • Protection class
  • Protection class, installation space
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Shock resistance (Norm)
  • Continuous shock resistance (Norm)
  • Vibration resistance (Norm)
  • Relative humidity
  • Air pressure
  • Delta tmax
Attribute4621273E
Bestellung
Bestellung
Protection class IP20 DIN EN 60529
Protection class, installation space IP54 DIN EN 60529
Operating temperature min. 0 °C
Max. operating temperature 55 °C
Min. storage temperature -25 °C
Max. storage temperature 70 °C
Shock resistance (Norm) 30 g / 11 ms
Continuous shock resistance (Norm) 10 g / 16 ms
Vibration resistance (Norm) 10...55 Hz; 0.5mm; 5g
Relative humidity 5 - 85 %
Air pressure 860 - 1060 hPa
Delta tmax 0.5 °C/min
  • Installation
  • 4621273E
  • Installation
  • Mounting type
  • Weight
  • Installation
Attribute4621273E
Bestellung
Bestellung
Mounting type Mounting rail
Weight 250 g
Installation arbitrary
  • Connection
  • 4621273E
  • Connection
  • Spring-type terminals
  • Pluggable connection terminals
  • Min. connection cross section
  • Max. connection cross section
Attribute4621273E
Bestellung
Bestellung
Spring-type terminals yes
Pluggable connection terminals no
Min. connection cross section 0.14 mm²
Max. connection cross section 2.5 mm²
  • Approvals
  • 4621273E
  • Approvals
  • Certified in accordance with
  • CE label
Attribute4621273E
Bestellung
Bestellung
Certified in accordance with EN ISO 13849-1 IEC 61508 IEC 62061 UL 508
CE label yes
Manual de operação
Manual safety evaluation unit 4621273E pdf 2,31 MB
Evaluation unit 4621273 - Certificate TÜV Nord pdf 208,12 KB
Evaluation unit 4621273 - Certificate UL pdf 368,72 KB

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.