eloProg – Controlador de segurança modular programável – Módulo básico 485EPB

eloProg – Controlador de segurança modular programável – Módulo básico 485EPB

  • 8 entradas e 2 saídas transistores redundante
  • 4 saídas de monitoramento
  • Diagnóstico através  de 2 saídas programáveis e LEDs
  • 2 entradas EDM para monitoramento de contatores ou conexão de um botão de partida
  • Até 14 módulos de expansão podem ser conectados no módulo básico
  • Conector  T modelo 350EPT (5-vias) para redução de espaço de montagem com módulos de expansão (opcional)
  • Cabo USB modelo 350EPU para transferência de dados para o módulo básico (opcional)
  • Cartão de memória modelo 350EPS para backup de dados e programação do módulo básico sem PC (opcional)

O módulo básico é uma unidade de controle de segurança configurável que pode ser usada como um dispositivo independente. A comunicação com os módulos de expansão é feita por meio de um barramento interno de 5 vias.

A função de segurança é configurada através de PC e pode ser transferida para o módulo básico via cabo USB. O módulo básico também possui uma entrada para cartão de memória.

Desenho técnico

1/1
Cat_MS_SAE_485_Auswerteeinheit_DRW1
Tela cheia
1/1

Article characteristics

  • Attribute
  • 485EPB
  • Attribute
  • Housing colour
Attribute485EPB
Bestellung
Bestellung
Housing colour Gehäuse schwarz Frontplatte gelb
  • Attribute
  • 485EPB
  • Attribute
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching current at safety output
  • Max. switching current at control output
  • Number of configurable electronic safety outputs
  • Number of electronic control outputs
  • Number of test outputs (clocked)
  • Number of safety inputs
  • Stop category 0 (STO) nach IEC 61800-5-2
  • Stop category 1 (SS1) nach IEC 61800-5-2
  • EDM/start input
  • Start function
  • Feedback circuit
  • Start-up test present
  • LED display
  • Overvoltage category
  • Pollution degree
  • Operating voltage min.
  • Operating voltage max.
  • Short-circuit detection
  • Cross-short detection
  • Wire-break detection
  • Power consumption
  • Operating time
  • Response time
Attribute485EPB
Bestellung
Bestellung
Max. switching voltage at safety output 24 V DC
Max. switching voltage at control output 24 V DC
Max. switching current at safety output 0.4 A
Max. switching current at control output 0.1 A
Number of configurable electronic safety outputs 2
Number of electronic control outputs 2
Number of test outputs (clocked) 4
Number of safety inputs 8
Stop category 0 (STO) nach IEC 61800-5-2 Depending on the configuration
Stop category 1 (SS1) nach IEC 61800-5-2 Depending on the configuration
EDM/start input Depending on the configuration
Start function Depending on the configuration
Feedback circuit Depending on the configuration
Start-up test present Depending on the configuration
LED display five-coloured
Overvoltage category II
Pollution degree 2
Operating voltage min. 19.2 V DC
Operating voltage max. 28.8 V DC
Short-circuit detection Depending on the configuration
Cross-short detection Depending on the configuration
Wire-break detection Depending on the configuration
Power consumption 3 W
Operating time Depending on the configuration ms
Response time 10,6 - 12,6 ms
  • Attribute
  • 485EPB
  • Attribute
  • Dimensions
Attribute485EPB
Bestellung
Bestellung
Dimensions 108 x 22,5 x 114,5 mm (H/B/T)
  • Attribute
  • 485EPB
  • Attribute
  • Housing material
Attribute485EPB
Bestellung
Bestellung
Housing material PA
  • Attribute
  • 485EPB
  • Attribute
  • Protection class, housing
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Relative humidity
Attribute485EPB
Bestellung
Bestellung
Protection class, housing IP20 DIN EN 60529
Operating temperature min. -10 °C
Max. operating temperature 55 °C
Min. storage temperature -20 °C
Max. storage temperature 85 °C
Relative humidity 10...95 %
  • Attribute
  • 485EPB
  • Attribute
  • Mounting type
  • Weight
  • Torque for connection terminals
Attribute485EPB
Bestellung
Bestellung
Mounting type Mounting rail
Weight 150 g
Torque for connection terminals 0.6 N m
  • Attribute
  • 485EPB
  • Attribute
  • Max. length of the connection cables
  • Screw terminals
  • Pluggable connection terminals
  • Min. connection cross section
  • Max. connection cross section
  • Slot for memory card (350EPS) present
  • Connection present on PC
  • Connection to slave modules
  • Max. number of slave modules
  • Max. number of slave modules of the same type
Attribute485EPB
Bestellung
Bestellung
Max. length of the connection cables 100 m
Screw terminals yes
Pluggable connection terminals yes
Min. connection cross section 0.5 mm²
Max. connection cross section 2.5 mm²
Slot for memory card (350EPS) present yes
Connection present on PC yes
Connection to slave modules yes
Max. number of slave modules 14
Max. number of slave modules of the same type 4
  • Attribute
  • 485EPB
  • Attribute
  • Certified in accordance with
  • CE label
Attribute485EPB
Bestellung
Bestellung
Certified in accordance with EN ISO 13849-1 IEC 61508 IEC 62061 UL 508 / CSA 22.2
CE label yes
eloProg Safety Designer - Software de programação
eloProg Safety Designer zip 156 MB

Software includes operation manual

Certificate eloProg - TÜV Süd pdf 716 KB

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.