Sensor de nível 298A

Sensor de nível 298A

  • Tecnologia aplicada: boia magnética / haste com sensores magnéticos
  • Flange de 5 ou 4 furos de fixação ou rosca G1,5″, G2″.
  • Comprimento da haste de 187 até 1210 mm
  • Material: alumínio ou aço inoxidável (boia em PA12)
  • Vedação: Viton ou borracha nitrílica (NBR)
  • Sinal de saída: Analógico
    • Corrente: 4…20 mA
    • Tensão: 0,5…4,5 V DC
  • Resolução de medição: 20 mm ou 30 mm
  • Temperatura de trabalho -40 °C  até +110 °C
  • Classe de proteção: IPX7 DIN EN 60529 / montagem em área externa IPX7 DIN EN 60529 / IP6K9K ISO 20653

O novo sensor de nível modelo 298A chegou para expandir a família de sensores para medição contínua de nível da elobau. Este sensor pode ser aplicado em tanques de combustível, óleo, água entre outros produtos químicos. Agora nossos cliente podem ser beneficiar de um sensor compacto, configurável de forma flexível e com sinal de saída analógico.

Desenho técnico

1/3
Cat_LEV_298A_DRW1
Tela cheia
1/3
2/3
Cat_LEV_298A_CD
Tela cheia
2/3
3/3
Cat_LEV_298A_CON1
Tela cheia
3/3

Article characteristics

  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Technology
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Operating voltage min.
  • Operating voltage max.
  • Max. overvoltage
  • Max. current consumption
  • Load resistance min.
  • Load resistance max.
  • Hysteresis
  • Measuring length
  • Lower blind zone
  • Blind zone from sealing surface
  • Outputs
  • Spacing
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Technology Reed Reed
Polarity reversal protection yes yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Operating voltage min. 9 V DC 9 V DC 9 V DC
Operating voltage max. 32 V DC 16 V DC (-40...110°C)
32 V DC (-40…85°C)
Max. overvoltage (5min @25°C) 36 V DC (5min @25°C) 36 V DC
Max. current consumption 15 mA 40 mA
Load resistance min. 10000 Ohm
Load resistance max. - See load resistance diagram
Hysteresis 3mm ±2 3mm ±2
Measuring length Riser length (L) - 120 mm Riser length (L) - 120 mm
Lower blind zone 40 mm 40 mm
Blind zone from sealing surface 80 mm 80 mm
Outputs analog analog
Spacing 20 mm 30 mm 20 mm 30 mm
  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Float diameter
  • Immersion depth with density of 1 g/mm³
  • Recommended minimum density of the medium
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Float diameter 39 mm 39 mm
Immersion depth with density of 1 g/mm³ 18 mm 26 mm 18 mm 26 mm
Recommended minimum density of the medium 0.7 g/cm³ 0.7 g/cm³
  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Housing material
  • Riser material
  • Float material
  • Sealing material
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Housing material VA 1.4571 with riser material VA 1.4571 or alu with riser material alu VA 1.4571 with riser material VA 1.4571 or alu with riser material alu
Riser material Selectable: Aluminium or VA 1.4571 Selectable: Aluminium or VA 1.4571
Float material PA12 PA12
Sealing material Selectable: FKM or NBR Selectable: FKM or NBR
  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Protection class inside container
  • Protection class outside container
  • Vibration resistance (Norm)
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Protection class inside container IPx7 DIN EN 60529 IPx7 DIN EN 60529
Protection class outside container IPx7 DIN EN 60529 / IP6K9K ISO 20653 IPx7 DIN EN 60529 / IP6K9K ISO 20653
Vibration resistance (Norm) DIN EN 60068-2-64 DIN EN 60068-2-64
Operating temperature min. -40 °C -40 °C
Max. operating temperature 110 °C 110 °C
Min. storage temperature -40 °C -40 °C
Max. storage temperature 110 °C 110 °C
  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Mounting type
  • Installation
  • Bolt circle
  • Riser length
  • Mounting position
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Mounting type Flange Flange
Installation from outside from outside
Bolt circle 5-hole, symmetrical 5-hole, asymmetrical 4-hole, symmetrical 5-hole, symmetrical 5-hole, asymmetrical 4-hole, symmetrical 5-hole, symmetrical 5-hole, asymmetrical 4-hole, symmetrical 5-hole, symmetrical 5-hole, asymmetrical 4-hole, symmetrical
Riser length min. 187 mm - max. 1207 mm min. 220 mm - max. 1210 mm min. 187 mm - max. 1207 mm min. 220 mm - max. 1210
Mounting position ±30° ±30°
  • Attribute
  • 298A0.A10.....00
  • 298A0.A11.....00
  • 298A0.A12.....00
  • 298A0.A20.....00
  • 298A0.A21.....00
  • 298A0.A22.....00
  • 298A1.A10.....00
  • 298A1.A11.....00
  • 298A1.A12.....00
  • 298A1.A20.....00
  • 298A1.A21.....00
  • 298A1.A22.....00
  • Attribute
  • Connector version
  • Connector type
  • Connection
Attribute298A0.A10.....00298A0.A11.....00298A0.A12.....00298A0.A20.....00298A0.A21.....00298A0.A22.....00298A1.A10.....00298A1.A11.....00298A1.A12.....00298A1.A20.....00298A1.A21.....00298A1.A22.....00
Bestellung
Bestellung
Connector version Angled Angled
Connector type AMP Superseal 1.5 AMP Superseal 1.5
Connection Connector Connector
1/1
Ordering Key 298A
Tela cheia
1/1
Downloads
Manual tank level sensor 298... pdf 2 MB
Configuration sheet 298A fuel level sensor with flange or mounting thread, current and voltage output signal pdf 125 KB

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.