elobau
Tilt sensor or inclinometer N4, dual-axis

Tilt sensor N4


Dual-axis tilt sensor N4 is used for measuring the slope of lifting platforms or for monitoring the fork tilt on telescopic ladders.

 

  • Long service life and reliability thanks to the mechanics-free MEMS technology
  • The analogue output signals can be combined with additional switching points
  • Tilt range up to ±60°
  • Protection class of IP67
  • Temperature resistant from -40°C to +70°C
  • Current or voltage output, or switching output via relay
  • Depending on the angle, resolution up to ? 0.04°
  • Practical adjustment of the neutral position through remote control
  • With versions with switching output, switch-on and switch-off delay selectable
N4.A... Product inquiry
output analogue
angular range 5 60
operating voltage 1030 VDC
operating current typ. 32 mA
output signal Uout X = 0,5 V4,5 V, lout = 4 mA20 mA
load resistance (RL) Uout = min. 10 kΩ (Ri = 100 Ω), lout = UB > 15 V max. 500 Ω, UB < 15 V max. 200 Ω
switching voltage
switching current
delay time
switching points
zero justification max. 5
resolution angular range ≤ 25: ≤ 0,04, angular range > 25: ≤ 0,14
linearity error typ. 1% of the angular range
repeating accuracy angular range ≤ 25: 0,2, angular range > 25: 0,5
offset temperature drift 0,25 % (voltage output 0,5V ... 4,5V) 1 % (current output 4mA ... 20mA)
vibration filter critical frequency typ. 40 Hz (changeable on customer request)
signal update rate appr. 100 Hz
startup time ≤ 500 ms
housing material top housing: PBT GF35, housing cover: PC
mounting bush 5,3 mm


tolerance details at room temperature 23C. applies to other temperatures: Ubmin = Tamb 0,0344 + 9V
elobau worldwide
We use cookies for analysis and marketing purposes. By continuing to use this website, you agree to the use of cookies. Further information can be found in our data privacy policy. Please press the OK button if you want to view our policy. You can prevent cookies from being stored by adjusting your browser settings.