Skip to content
Climate neutral since 2010

Tilt sensor N3

Tilt sensor N3

  • Long service life and reliability thanks to the mechanics-free MEMS technology
  • The analogue output signals can be combined
    with additional switching points
  • Tilt range up to ±60°
  • IP67 protection class
  • Operating range from -40 °C to +70 °C
  • Analogue current or voltage output, or volt free switching output via relay
  • Depending on the angle, resolution up to ≤ 0.04°
  • Adjustment of the neutral position possible
    through remote control
  • Selectable switch-on and switch-off delay at the
    switching output

The robustly designed N3 tilt sensor has a high impact and vibration resistance so is frequently used for tilt measurement in construction machinery, industrial trucks and adverse industrial environments. The N3 tilt sensor also has a high resolution and repeating accuracy. It can be easily programmed and the neutral position adjusted with the corresponding infrared remote control.

Technical drawing

1/2
N3_technical_dr_01
Full screen
1/2
2/2
N3_technical_dr_02
Full screen
2/2

Article characteristics

  • Electrical data
  • N3.A1...
  • N3.A2...
  • N3.D0....
  • N3.K1....
  • N3.K2....
  • Electrical data
  • Max. switching voltage
  • Max. switching current
  • Max. switching power
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance max.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Linearity error
  • Repeating accuracy
  • Signal update rate
  • Technology
  • Number of measurement axes (Number)
  • Angle measuring range
  • Initialisation time after power on/start-up time
  • Switching points
  • Zero justification
  • Vibration filter
  • Switching output
  • Connection type (switching output)
  • Outputs
  • MTTF
  • Resolution
  • Temperature coefficient
AttributeN3.A1...N3.A2...N3.D0....N3.K1....N3.K2....
Bestellung
Bestellung
Max. switching voltage 48 V DC
Max. switching current 1 A
Max. switching power 30 W
Polarity reversal protection yes
Output signal min. 0.5 V DC 0.5 V DC
Output signal max. 4.5 V DC 4.5 V DC
Output signal min. 4 mA 4 mA
Output signal max. 20 mA 20 mA
Output signal - centre position/zero position 2.5 V DC 2.5 V DC
Output signal - centre position/zero position 12 mA 12 mA
EMC immunity (Norm) ISO 11452-5:2000 ISO7637-2:2004
EMC emission (Norm) DIN EN 55025:2003
Operating voltage min. 10 V DC
Operating voltage max. 30 V DC
Current consumption 24 mA 36 mA
Load resistance min. 10000 Ohm 10000 Ohm
Load resistance max. 200 Ohm 200 Ohm
Short-circuit resistance to GND no
Short-circuit resistance to supply no
Linearity error typ. +-1 %
Repeating accuracy <= 25°:0,2°, >25°:0,5 °
Signal update rate 100 Hz
Technology MEMS
Number of measurement axes (Number) 1
Angle measuring range (Selectable in 5° increments) ±5°…±60 °
Initialisation time after power on/start-up time 500 ms
Switching points (Selectable in 0.5° increments) ±1.5°…±60 °
Zero justification ±5°
Vibration filter 40 Hz
Switching output 2x NO
Connection type (switching output) Selectable
Outputs 4...20mA 0,5...4,5V Relay 4...20mA + relay 0,5...4,5V + relay
MTTF 29.7 a 29.3 a 29.7 a 29.3 a
Resolution <= 25°:<=0,04°,>25°:<=0,14 °
Temperature coefficient 0.008°/K
  • Environmental conditions
  • N3.A1...
  • N3.A2...
  • N3.D0....
  • N3.K1....
  • N3.K2....
  • Environmental conditions
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Min. cable temperature range, moving
  • Max. cable temperature range, moving
  • Min. cable temperature range, fixed installation
  • Max. cable temperature range, fixed installation
  • Shock resistance (Norm)
  • Vibration resistance (Norm)
  • Impact resistance (Norm)
  • ESD insulation resistance (Norm)
AttributeN3.A1...N3.A2...N3.D0....N3.K1....N3.K2....
Bestellung
Bestellung
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 70 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Min. cable temperature range, moving -10 °C -5 °C -40 °C
Max. cable temperature range, moving 105 °C 80 °C
Min. cable temperature range, fixed installation -30 °C -40 °C
Max. cable temperature range, fixed installation 105 °C 80 °C
Shock resistance (Norm) DIN IEC 68 Teil 2-27
Vibration resistance (Norm) DIN IEC 68 Teil 2-6 DIN IEC68-2-64
Impact resistance (Norm) max. 50 g
ESD insulation resistance (Norm) ISO 10605:2008
  • Installation
  • N3.A1...
  • N3.A2...
  • N3.D0....
  • N3.K1....
  • N3.K2....
  • Installation
  • Torque for fastening screws
  • Weight
AttributeN3.A1...N3.A2...N3.D0....N3.K1....N3.K2....
Bestellung
Bestellung
Torque for fastening screws 6 N m
Weight 100 g
  • Connection
  • N3.A1...
  • N3.A2...
  • N3.D0....
  • N3.K1....
  • N3.K2....
  • Connection
  • Connector type
  • Cable length
  • Connection
AttributeN3.A1...N3.A2...N3.D0....N3.K1....N3.K2....
Bestellung
Bestellung
Connector type Deutsch 8 pol.
Cable length Variable (1m, 3m, 5m, 10m)
Connection Deutsch, 8-pin / cable outlet
  • Approvals
  • N3.A1...
  • N3.A2...
  • N3.D0....
  • N3.K1....
  • N3.K2....
  • Approvals
  • CE label
AttributeN3.A1...N3.A2...N3.D0....N3.K1....N3.K2....
Bestellung
Bestellung
CE label yes
1/2
Ordering Key N3
Full screen
1/2
2/2
N3_infrared
Full screen
2/2
Operating instructions and product information
Manual tilt sensor type N3... / N4... pdf 720.99 KB

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.