Skip to content
Climate neutral since 2010

Angle sensor 424A

Availabe in elostore

Angle sensor 424A

Availabe in elostore
  • Long lifetime and extremely reliable from contactless measurement with Hall principle
  • Angle measurement range between 30° and 120°
  • IP67 protection class for harsh environmental conditions
  • Operating temperature range from -40 °C to +85 °C
  • Resolution 0.1°
  • Various current or voltage output signals
  • Infinitely short-circuit proof
  • Available together with actuation lever for simple connection
  • EMV stabile for the motor vehicle sector, field withstand 200 V/m
  • Ball bearing (optionally with plain bearing)

The angle sensor 424A is used for measuring angles between 30° and 120°. The 424A is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life. Due to high protection class IP67, the sensor can be used used reliably even under tough environmental conditions. Owing to their robustness, the sensors are particularly suitable for measuring the angular positions of rotating elements under extreme aenvironmental conditions, e.g. on mobile machinery, in cranes, excavators, ships, mobile and stationary waste compactors, valve controllers, robot technology and wind turbines or in large medical devices.

Ce produit est également disponible dans notre elo.store.

Technical drawing

1/1
424A_A_technical_dr_01
Full screen
1/1

Article characteristics

  • Electrical data
  • 424A.1A...
  • 424A.6A...
  • 424A.7A...
  • Electrical data
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • Resolution
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance max.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Temperature coefficient
  • Signal sequence
  • Signal update rate
  • Outputs (quantity, type)
  • Technology
  • Angle measuring range
  • Outputs
  • MTTF
  • Typical linearity error
  • EMC Agricultural and forestry machines (Norm)
  • EMC Earth-moving and building construction machinery (Norm)
  • EMC Industrial trucks (Norm)
Attribute424A.1A...424A.6A...424A.7A...
Bestellung
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Output signal - centre position/zero position 2.5 V DC
Output signal - centre position/zero position 12 mA
Resolution 0.1 °
Operating voltage min. 10 V DC 4.5 V DC 10 V DC
Operating voltage max. 30 V DC 5.5 V DC 30 V DC
Current consumption 18 mA 8 mA 10 mA
Load resistance min. 20000 Ohm
Load resistance max. 250 Ohm
Short-circuit resistance to GND yes
Short-circuit resistance to supply yes
Temperature coefficient typ. ±250 ppm/K
Signal sequence Standard CCW (optional CW)
Signal update rate 2000 Hz
Outputs (quantity, type) 1
Technology Hall
Angle measuring range 30°...120 °
Outputs 4...20mA 0,5...4,5V ratiometric 0,5...4,5V
MTTF 101 a 225.7 a 133 a
Typical linearity error <= ±15° : ±0,2°
<= ±25° : ±0,4°
<= ±35° : ±1,0°
<= ±45° : ±2,0°
<= ±60° : ±5,0°
EMC Agricultural and forestry machines (Norm) EN ISO 14982
pulse 5b: max. voltage 35V (absolute), functional status C for pulse 1 and 4
EN ISO 14982
conducted disturbance not applicable for 5V supply
EN ISO 14982
pulse 5b: max. voltage 35V (absolute), functional status C for pulse 1 and 4
EMC Earth-moving and building construction machinery (Norm) DIN EN ISO 13766-1
pulse "load dump": max. voltage 35V (absolute)
DIN EN ISO 13766-1
conducted disturbance not applicable for 5V supply
DIN EN ISO 13766-1
pulse "load dump": max. voltage 35V (absolute)
EMC Industrial trucks (Norm) DIN EN 12895
  • Mechanical data
  • 424A.1A...
  • 424A.6A...
  • 424A.7A...
  • Mechanical data
  • Max. shaft load, axial
  • Max. shaft load, radial
  • Bearing
  • Mechanical stop
  • Actuating lever
Attribute424A.1A...424A.6A...424A.7A...
Bestellung
Bestellung
Max. shaft load, axial 50 N
Max. shaft load, radial 100 N
Bearing Ball bearing
Mechanical stop Optional
Actuating lever Selectable
  • Environmental conditions
  • 424A.1A...
  • 424A.6A...
  • 424A.7A...
  • Environmental conditions
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute424A.1A...424A.6A...424A.7A...
Bestellung
Bestellung
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
  • Installation
  • 424A.1A...
  • 424A.6A...
  • 424A.7A...
  • Installation
  • Torque for fastening screws
Attribute424A.1A...424A.6A...424A.7A...
Bestellung
Bestellung
Torque for fastening screws 2.5 N m
  • Connection
  • 424A.1A...
  • 424A.6A...
  • 424A.7A...
  • Connection
  • Connector type
Attribute424A.1A...424A.6A...424A.7A...
Bestellung
Bestellung
Connector type AMP Superseal 1.5
1/1
424A_A_ordering_key
Full screen
1/1

Variants in elostore

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.