Tilt sensor N4

Tilt sensor N4

Product characteristics

  • Long service life and reliability thanks to the
    mechanics-free MEMS technology
  • The analogue output signals can be combined with additional switching points
  • Tilt range up to ±60°
  • IP67 protection class
  • Operating range from -40 °C to +70 °C
  • Analogue current or voltage output, or volt free
    switching output via relay
  • Depending on the angle, resolution up to ≤ 0.04°
  • Adjustment of the neutral position with
    remote control
  • Selectable switch-on and switch-off delay at the
    switching output

The robustly designed N4 tilt sensor has a high impact and vibration resistance so is frequently used for tilt measurement in construction machinery, industrial trucks and adverse industrial environments. The dual-axis sensor can be easily programmed and the neutral position adjusted with the corresponding infrared remote control.

Technical drawing

Image 1/6
Image 1/6
full screen
Image 2/6
Image 2/6
full screen
Image 3/6: The block circuit diagram depicts the sensor with the switched-on operating voltage in the zero position.
Image 3/6: The block circuit diagram depicts the sensor with the switched-on operating voltage in the zero position.
full screen
Image 4/6
Image 4/6
full screen
Image 5/6
Image 5/6
full screen
Image 6/6: The block circuit diagram depicts the sensor with the switched-on operating voltage in the zero position.
Image 6/6: The block circuit diagram depicts the sensor with the switched-on operating voltage in the zero position.
full screen

article characteristics

Selection of the feature:
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • Max. switching voltage
  • Max. switching current
  • Max. switching power
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • MTTF
  • Load resistance max.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Linearity error
  • Repeating accuracy
  • Signal update rate
  • Technology
  • Number of measurement axes (Number)
  • Angle measuring range
  • Initialisation time after power on/start-up time
  • Switching points
  • Zero justification
  • Vibration filter
  • Switching output
  • Connection type (switching output)
  • Outputs
  • Temperature coefficient
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
Max. switching voltage 48 V DC
Max. switching current 1 A
Max. switching power 30 W
Polarity reversal protection yes
Output signal min. 0.5 V DC 0.5 V DC
Output signal max. 4.5 V DC 4.5 V DC
Output signal min. 4 mA 4 mA
Output signal max. 20 mA 20 mA
Output signal - centre position/zero position 2.5 V DC 2.5 V DC
Output signal - centre position/zero position 12 mA 12 mA
EMC immunity (Norm) ISO 11452-5:2000 ISO7637-2:2004
EMC emission (Norm) DIN EN 55025:2003
Operating voltage min. 10 V DC
Operating voltage max. 30 V DC
Current consumption 24 mA 56 mA
Load resistance min. 10000 Ohm 10000 Ohm
MTTF 29.6 a 29.3 a 29.6 a 29.3 a
Load resistance max. 200 Ohm 200 Ohm
Short-circuit resistance to GND no
Short-circuit resistance to supply no
Linearity error typ. +-1 %
Repeating accuracy <= 25°: 0,2°, >25°: 0,5 °
Signal update rate 100 Hz
Technology MEMS
Number of measurement axes (Number) 2
Angle measuring range (wählbar in 5° Schritten) +-5°...+-60 °
Initialisation time after power on/start-up time 500 ms
Switching points (wählbar in 0,5° Schritten) +-1,5°...+- 60 °
Zero justification ±5°
Vibration filter 40 Hz
Switching output 2x NO
Connection type (switching output) Selectable
Outputs 4...20mA 0,5...4,5V Relay 4...20mA + Relay 0,5...4,5V + Relay
Temperature coefficient 0.008°/K
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • Housing material
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
Housing material Gehäuseoberteil:PBT; Gehäusedeckel: PC
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Min. cable temperature range, moving
  • Max. cable temperature range, moving
  • Min. cable temperature range, fixed installation
  • Max. cable temperature range, fixed installation
  • Shock resistance (Norm)
  • Vibration resistance (Norm)
  • Impact resistance (Norm)
  • ESD insulation resistance (Norm)
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 70 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Min. cable temperature range, moving -5 °C -40 °C
Max. cable temperature range, moving 80 °C
Min. cable temperature range, fixed installation -40 °C
Max. cable temperature range, fixed installation 80 °C
Shock resistance (Norm) DIN IEC 68 Teil 2-27
Vibration resistance (Norm) DIN IEC 68 Teil 2-6 DIN IEC68-2-64
Impact resistance (Norm) max. 20000 g
ESD insulation resistance (Norm) ISO 10605:2008
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • Torque for fastening screws
  • Weight
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
Torque for fastening screws 6 N m
Weight 100 g
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • Connector type
  • Cable length
  • Connection
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
Connector type Deutsch 8 pol.
Cable length variabel (1m, 3m, 5m, 10m)
Connection Deutsch 8-pol. / Kabelabgang
  • Attribute
  • N4.A1...
  • N4.A2...
  • N4.D0B...
  • N4.K1B...
  • N4.K2B...
  • Attribute
  • CE label
Attribute N4.A1... N4.A2... N4.D0B... N4.K1B... N4.K2B...
Bestellung
CE label yes

Product has been added to watchlist.

customer reviews

Product has been added to watchlist.