CAN angle sensor 424C.360

CAN angle sensor 424C.360

Product characteristics

  • Long lifetime and extremely reliable from contactless measurement with Hall principle
  • Angle measuring range up to 360°
  • IP67 protection class for harsh environmental
    condi­tions
  • Temperature range 40 °C to +85 °C
  • CAN bus connection (ISO 11898)
  • Protocols CANopen and SAE J1939
  • Optionally with operating lever
  • Connection with Deutsch
    DT06-6S connector

The 360° angle sensor 424C is used for angle measurements from 20° to 360° and is based on the contactless Hall measurement principle. It is extremely reliable and ensures a long service life. Due to the ball bearing, the pivot axis can absorb smaller radial forces and is therefore suitable for many applications in automation and vehicle construction where rotary movements of an axis must be detected.

Technical drawing

Image 1/4
Image 1/4
Full screen
Image 2/4
Image 2/4
Full screen
Image 3/4
Image 3/4
Full screen
Image 4/4
Image 4/4
Full screen

Article characteristics

Selection of the feature:
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Polarity reversal protection
  • Resolution
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Temperature coefficient
  • Linearity error
  • Signal sequence
  • Signal update rate
  • Outputs (quantity, type)
  • Technology
  • Angle measuring range
  • Fieldbus system
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
  • Outputs
  • MTTF
Attribute 424CJ360 424CO360
Bestellung
Polarity reversal protection yes
Resolution 0.1 °
EMC immunity (Norm) ISO 11452-5:2002 ISO7637-2:2004
EMC emission (Norm) EN 55025:2003
Operating voltage min. 9 V DC
Operating voltage max. 32 V DC
Current consumption 70 mA
Temperature coefficient 5.6 ppm/K
Linearity error < +- 1 %
Signal sequence CW/CCW
Signal update rate 10 Hz
Outputs (quantity, type) 1
Technology Hall
Angle measuring range 360 °
Fieldbus system CAN
Protocol J1939 CANopen
Node ID / Source Address 0x70
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
Outputs CAN J1939 CANopen
MTTF 49.3 a
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Max. shaft load, axial
  • Max. shaft load, radial
  • Mechanical stop
Attribute 424CJ360 424CO360
Bestellung
Max. shaft load, axial 50 N
Max. shaft load, radial 100 N
Mechanical stop no
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Housing material
Attribute 424CJ360 424CO360
Bestellung
Housing material PBT
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute 424CJ360 424CO360
Bestellung
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Torque for fastening screws
Attribute 424CJ360 424CO360
Bestellung
Torque for fastening screws 2.5 N m
  • Attribute
  • 424CJ360
  • 424CO360
  • Attribute
  • Connector type
Attribute 424CJ360 424CO360
Bestellung
Connector type Deutsch DT06-6S

Product has been added to watchlist.

Customer reviews

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.