Fingertip Joystick J3

Fingertip Joystick J3

Technical specifications

  • Four actuation types: no-detent / detent, with friction brake or centre position interlock
  • High reliability and long service life thanks to contactless Hall-effect and reed technology
  • Analogue output signal (current/voltage, also redundant) or switching output
  • CAN-bus connection (CANopen / SAE J1939)
  • Various handle options, available with up to one push button switch
  • IP67 protection class of electronics, ideal for harsh environmental conditions
  • Deflection ±20° or ±25°

CAN-capable, bottom mounted.

The single axis Hall-effect, Fingertip joystick J3, is ideal for use in control panels and armrests of industrial trucks and municipal vehicles, as well as in agricultural and construction machinery thanks to its compact and robust design.

Technical drawing

Image 1/5: J3 frontale Sicht
Image 1/5: J3 frontale Sicht
full screen
Image 2/5
Image 2/5
full screen
Image 3/5: J3 CAN-fähig Einbau von unten
Image 3/5: J3 CAN-fähig Einbau von unten
full screen
Image 4/5: J3 Schaltbild
Image 4/5: J3 Schaltbild
full screen
Image 5/5: discrete output
Image 5/5: discrete output
full screen

article characteristics

Selection of the feature:
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Max. switching voltage
  • Max. switching current
  • Max. switching power
  • Max. switching power
  • Contact form
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance at 10V max.
  • Load resistance al 30V max.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Outputs (quantity, type)
  • Technology
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Max. switching voltage 48 V DC
Max. switching current 0.3 A
Max. switching power 10 W
Max. switching power 10 VA
Contact form NO
Polarity reversal protection yes yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Output signal analogue
Output signal - centre position/zero position 2.5 V DC
Output signal - centre position/zero position 12 mA
EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
Operating voltage min. 10 V DC 4.5 V DC 10 V DC 9 V DC
Operating voltage max. 30 V DC 5.5 V DC 30 V DC 36 V DC
Current consumption bei 12 V max. 18 mA max. 15 mA bei 12 V max 15 mA < 120 mA
Load resistance min. 20000 Ohm
Load resistance at 10V max. 250 Ohm
Load resistance al 30V max. 1250 Ohm
Short-circuit resistance to GND no yes no yes no
Short-circuit resistance to supply no yes no yes no
Outputs (quantity, type) 1 3
Technology Hall Reed
Protocol J1939 CANopen
Node ID / Source Address 0x70 0x11
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Max. lever load with specified lever length
  • Deflection
  • Actuation type
  • Service life, mechanical (Cycles)
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Max. lever load with specified lever length X-Achse: 150 N bei 50 mm / Y-Achse: 100 N bei 50 mm N X-Achse: 150 N bei 50 mm / Y-Achse: 100 N bei 50 mm N
Deflection ± 20 ° ± 20 °
Actuation type single axis single axis
Service life, mechanical (Cycles) 2000000 2000000
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Housing material
  • Shaft material
  • Gaiter material
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Housing material PBT PBT
Shaft material PBT PBT
Gaiter material CR 45 CR 45
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Protection class, electronic
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Protection class, electronic IP67 DIN EN 60529 IP67 DIN EN 60529
Operating temperature min. -25 °C -25 °C
Max. operating temperature 85 °C 85 °C
Min. storage temperature -40 °C -40 °C
Max. storage temperature 85 °C 85 °C
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Installation
  • Mounting type
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Installation from below from below
Mounting type screwed from above screwed from above
  • Attribute
  • J3A1...
  • J3A6...
  • J3A7...
  • J3CJ...
  • J3CO...
  • J3D8...
  • Attribute
  • Connector type
  • Cable length
Attribute J3A1... J3A6... J3A7... J3CJ... J3CO... J3D8...
Bestellung
Connector type Mini-Fit Jr. Mini-Fit Jr.
Cable length 0.3 m 0.3 m

Product has been added to watchlist.

customer reviews

Product has been added to watchlist.