Compact joystick J2

Compact joystick J2

Technical specifications

  • Space-saving design
  • High reliability and long service life thanks to contactless Hall-effect and reed technology
  • Analogue output signal (current/voltage, also redundant) or switching output possible
  • CAN-bus connection (CANopen / SAE J1939) available
  • IP67 protection class of electronics, ideal for harsh environmental conditions
  • Deflection ±20°
  • Available with various actuation types such as no detent / detent or centre position interlock

With up to 3 push button switches, bottom mounted.

Compact joystick J2 is used effectively in tractors for front loader control or in industrial trucks for controlling the forks. Up to three push button switches integrated in the handle enable the operation of additional functions.

Technical drawing

Image 1/4
Image 1/4
Full screen
Image 2/4
Image 2/4
Full screen
Image 3/4: Einbauöffnung für Standardgriff
Image 3/4: Einbauöffnung für Standardgriff
Full screen
Image 4/4
Image 4/4
Full screen

Article characteristics

Selection of the feature:
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Max. switching voltage
  • Max. switching current
  • Max. switching power
  • Max. switching power
  • Contact form
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance at 10V max.
  • Load resistance al 30V max.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Technology
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Max. switching voltage 48 V DC
Max. switching current 0.3 A
Max. switching power 10 W
Max. switching power 10 VA
Contact form NO
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Output signal analogue
Output signal - centre position/zero position 2.5 V DC
Output signal - centre position/zero position 12 mA
EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
Operating voltage min. 10 V DC 4.5 V DC 10 V DC 9 V DC
Operating voltage max. 30 V DC 5.5 V DC 30 V DC 36 V DC
Current consumption bei 12 V max. 18 mA max. 15 mA bei 12 V max 15 mA < 120 mA
Load resistance min. 20000 Ohm
Load resistance at 10V max. 250 Ohm
Load resistance al 30V max. 1250 Ohm
Short-circuit resistance to GND no yes no yes no
Short-circuit resistance to supply no yes no yes no
Technology Hall Reed
Protocol J1939 CANopen
Node ID / Source Address 0x70 0x11
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Max. lever load with specified lever length
  • Deflection
  • Actuation type
  • Service life, mechanical (Cycles)
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Max. lever load with specified lever length 250 N bei 70 mm N 250 N bei 70 mm N
Deflection ± 20 ° ± 20 °
Actuation type multi axis multi axis
Service life, mechanical (Cycles) 1000000 1000000
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Housing material
  • Shaft material
  • Gaiter material
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Housing material PBT PBT
Shaft material 1.4305 1.4305
Gaiter material NBR 438.40 NBR 438.40
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Protection class, electronic
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Protection class, electronic IP67 DIN EN 60529 IP67 DIN EN 60529
Operating temperature min. -25 °C -25 °C
Max. operating temperature 85 °C 85 °C
Min. storage temperature -40 °C -40 °C
Max. storage temperature 85 °C 85 °C
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Installation
  • Mounting type
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Installation from below from below
Mounting type screwed from above screwed from above
  • Attribute
  • J2A1...
  • J2A6...
  • J2A7...
  • J2CJ
  • J2CO...
  • J2D8...
  • Attribute
  • Connector type
  • Cable length
Attribute J2A1... J2A6... J2A7... J2CJ J2CO... J2D8...
Bestellung
Connector type Mini-Fit Jr. Mini-Fit Jr.
Cable length 0.3 m 0.3 m

Product has been added to watchlist.

Customer reviews

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.