Skip to content
Climate neutral since 2010

eloProg rotational speed modules 485EPS

eloProg rotational speed modules 485EPS

  • Various modules for the connection of 1 or 2 HTL, TTL or sine/cosine encoders
  • Additional inputs for up to 2 proximity sensors per module
  • 4 switching thresholds can be configured per axis
  • Rotational speed monitoring up to PLe
  • Pre-assembled T-connector (proprietary 5-way bus) for connection to the base module and other expansion modules simplifies wiring and saves space in the switch cabinet

The speed modules monitor standstill, maximum speed, a defined speed range and the rotation direction. In addition, up to 4 switching thresholds can be configured per axis.

The various modules are compatible with encoders with HTL, TTL or sine/cosine signals.

Technical drawing

1/1
Cat_MS_SAE_485_Auswerteeinheit_DRW1
Full screen
1/1

Article characteristics

  • Electrical data
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Electrical data
  • Operating voltage min.
  • Operating voltage max.
  • Power consumption
  • LED display
  • encoder interface
  • Encoder connections
  • Rated insulation voltage encoder
  • Overvoltage category encoder
  • Nominal pulse voltage encoder
  • Max. number of encoders
  • Max. frequency of encoder
  • Adjustable threshold range encoder
  • Initiators category
  • Initiators connections
  • Adjustable threshold range initiators
  • Max. number of initiators
  • Max. frequency of initiators
  • Max. number of axes
  • Standstill/overspeed gap
  • Min. gap between thresholds
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Operating voltage min. 19.2 V DC 19.2 V DC
Operating voltage max. 28.8 V DC 28.8 V DC
Power consumption 3 W 3 W
LED display No No
encoder interface HTL sin/cos TTL HTL sin/cos TTL
Encoder connections RJ45 RJ45
Rated insulation voltage encoder 250 V 250 V
Overvoltage category encoder II II
Nominal pulse voltage encoder 4 kV 4 kV
Max. number of encoders 1 2 2
Max. frequency of encoder 300 kHz 500 kHz 300 kHz 500 kHz
Adjustable threshold range encoder 1 Hz - 450 kHz 1 Hz - 450 kHz
Initiators category PNP/NPN - 3/4 Drähte PNP/NPN - 3/4 Drähte
Initiators connections via connection terminals via connection terminals
Adjustable threshold range initiators 1 Hz - 4 kHz 1 Hz - 4 kHz
Max. number of initiators 2 2
Max. frequency of initiators 5 kHz 5 kHz
Max. number of axes 2 2
Standstill/overspeed gap > 10 Hz > 10 Hz
Min. gap between thresholds > 5 % > 5 %
  • Mechanical data
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Mechanical data
  • Dimensions
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Dimensions 108 x 22,5 x 114,5 mm (H/B/T) 109 x 22,5 x 114,5 mm (H/B/T) 108 x 22,5 x 114,5 mm (H/B/T)
  • Material information
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Material information
  • Housing material
  • Housing colour
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Housing material PA PA
Housing colour Gehäuse schwarz Frontplatte gelb Gehäuse schwarz Frontplatte gelb
  • Environmental conditions
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Environmental conditions
  • Protection class, housing
  • Operating temperature min.
  • Max. operating temperature
  • Max. storage temperature
  • Relative humidity
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Protection class, housing IP20 DIN EN 60529 IP20 DIN EN 60529
Operating temperature min. -10 °C -10 °C
Max. operating temperature 55 °C 55 °C
Max. storage temperature 85 °C 85 °C
Relative humidity 10...95 % 10...96 % 10...95 %
  • Installation
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Installation
  • Mounting type
  • Torque for connection terminals
  • Weight
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Mounting type Mounting rail Mounting rail
Torque for connection terminals 0.6 N m 0.6 N m
Weight 150 g 150 g
  • Connection
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Connection
  • Connection to base module
  • Screw terminals
  • Pluggable connection terminals
  • Min. connection cross section
  • Max. connection cross section
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Connection to base module propriertary 5-way bus (T-connector) propriertary 5-way bus (T-connector)
Screw terminals yes yes
Pluggable connection terminals yes yes
Min. connection cross section 0.5 mm² 0.5 mm²
Max. connection cross section 2.5 mm² 2.5 mm²
  • Approvals
  • 485EPS1H
  • 485EPS1S
  • 485EPS1T
  • 485EPS2H
  • 485EPS2N
  • 485EPS2S
  • 485EPS2T
  • Approvals
  • Certified in accordance with
  • CE label
Attribute485EPS1H485EPS1S485EPS1T485EPS2H485EPS2N485EPS2S485EPS2T
Bestellung
Bestellung
Certified in accordance with EN ISO 13849-1 IEC 61508 IEC 62061 UL 508 / CSA 22.2 EN ISO 13849-1 IEC 61508 IEC 62061 UL 508 / CSA 22.2
CE label yes yes
1/1
485EPS_ordering_key
Full screen
1/1

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.