Skip to content
Climate neutral since 2010

Fingertip Joystick J3

Availabe in elostore

Fingertip Joystick J3

Availabe in elostore
  • Four actuation types: no-detent / detent, with friction brake or centre position interlock
  • High reliability and long service life thanks to contactless Hall-effect and reed technology
  • Analogue output signal (current/voltage, also redundant) or switching output
  • CAN-bus connection (CANopen / SAE J1939)
  • Various handle options, available with up to one push button switch
  • IP67 protection class of electronics, ideal for harsh environmental conditions
  • Deflection ±20° or ±25°

CAN-capable, bottom mounted.

The single axis Hall-effect, Fingertip joystick J3, is ideal for use in control panels and armrests of industrial trucks and municipal vehicles, as well as in agricultural and construction machinery thanks to its compact and robust design.

Ce produit est également disponible dans notre elo.store.

Technical drawing

1/4
J3
Full screen
1/4
2/4
J3_mounting
Full screen
2/4
3/4
J3_electrical_drawing
Full screen
3/4
4/4
J3_options
Full screen
4/4

Article characteristics

  • Electrical data
  • J3A6...
  • J3CJ...
  • J3CO...
  • Electrical data
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Outputs (quantity, type)
  • Technology
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
AttributeJ3A6...J3CJ...J3CO...
Bestellung
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal analogue
Output signal - centre position/zero position 2.5 V DC
EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895
Operating voltage min. 4.5 V DC 9 V DC
Operating voltage max. 5.5 V DC 36 V DC
Current consumption max. 15 mA < 120 mA
Load resistance min. 20000 Ohm
Short-circuit resistance to GND yes
Short-circuit resistance to supply yes
Outputs (quantity, type) 1
Technology Hall
Protocol J1939 CANopen
Node ID / Source Address 0x70 0x11
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
  • Mechanical data
  • J3A6...
  • J3CJ...
  • J3CO...
  • Mechanical data
  • Max. lever load with specified lever length
  • Deflection
  • Actuation type
  • Service life, mechanical (Cycles)
AttributeJ3A6...J3CJ...J3CO...
Bestellung
Bestellung
Max. lever load with specified lever length X- and Y-Axis 50mm/150 N
Deflection ± 20 °
Actuation type single axis
Service life, mechanical (Cycles) 2000000
  • Environmental conditions
  • J3A6...
  • J3CJ...
  • J3CO...
  • Environmental conditions
  • Protection class, electronic
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
AttributeJ3A6...J3CJ...J3CO...
Bestellung
Bestellung
Protection class, electronic IP67 DIN EN 60529
Operating temperature min. -25 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
  • Installation
  • J3A6...
  • J3CJ...
  • J3CO...
  • Installation
  • Installation
  • Mounting type
AttributeJ3A6...J3CJ...J3CO...
Bestellung
Bestellung
Installation from below
Mounting type screwed from above
  • Connection
  • J3A6...
  • J3CJ...
  • J3CO...
  • Connection
  • Connector type
  • Cable length
AttributeJ3A6...J3CJ...J3CO...
Bestellung
Bestellung
Connector type Mini-Fit Jr.
Cable length 0.3 m
1/1
J3_ordering_key
Full screen
1/1

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.