Heavy duty joystick J4F

Heavy duty joystick J4F

Technical specifications

  • Joystick and thumbwheel signals SIL 2 / PL d (cat. 3), push button SIL 1 / PL c in accordance with the latest Machinery Directive
  • High reliability and long service life thanks to contactless reed and Hall-effect technology
  • Joystick CAN module robust with IP67 electronics protection class, ideal for outdoor use
  • Direct mounting of electronics module onto joystick ensures minimum space requirement
  • Handle available with micro push button switches for use outside of the cabin
  • Modular construction of the handle enables application-specific modification
  • Ergonomic handle shape ensures fatigue-free operation

With safe electronics, installation from above

The robustly designed Heavy duty joystick J4F with safety electronics has been developed and certified in accordance with DIN ISO 13849-1:2008 PL d and in accordance with DIN EN IEC 61508:2010 SIL 2. This allows manufacturers of municipal vehicles and off-highway vehicles such as agricultural and construction machinery to avoid additional risk and failure probability calculations, and can reduce their documentation requirements as a result. Even safety-critical vehicle functions such as the direction of travel can be controlled.

Technical drawing

1/2
J4F
1/2
Full screen
2/2
J4F_options
2/2
Full screen

Article characteristics

  • Attribute
  • J4F...
  • Attribute
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Fieldbus system
  • Protocol
  • Transmitting cycle
  • Baud rate
Attribute J4F...
Operating voltage min. 9 V DC
Operating voltage max. 32 V DC
Current consumption 400 mA
Fieldbus system CAN
Protocol J1939
Transmitting cycle 15 ms
Baud rate 250 kBit/s
  • Attribute
  • J4F...
  • Attribute
  • Max. lever load with specified lever length
  • Deflection
  • Service life, mechanical (Cycles)
Attribute J4F...
Max. lever load with specified lever length 2000 N bei 190 mm N
Deflection ± 20 °
Service life, mechanical (Cycles) 2000000
  • Attribute
  • J4F...
  • Attribute
  • Housing material
  • Shaft material
  • Gaiter material
Attribute J4F...
Housing material Zinkdruckguss Z410
Shaft material Zinkdruckguss Z410
Gaiter material EPDM
  • Attribute
  • J4F...
  • Attribute
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
Attribute J4F...
Operating temperature min. -25 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
  • Attribute
  • J4F...
  • Attribute
  • Installation
  • Mounting type
Attribute J4F...
Installation from above
Mounting type screwed from above
  • Attribute
  • J4F...
  • Attribute
  • Connector type
Attribute J4F...
Connector type Deutsch DT04-6P

The right joystick and handle in just a few steps

Customer reviews

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.