Skip to content
Climate neutral since 2010

eloProg output expansion 485EPA

eloProg output expansion 485EPA

  • Up to 4 safe, redundant transistor outputs
  • Diagnostics via up to 4 configurable control outputs and LEDs
  • Up to 4 EDM inputs for monitoring of downstream contactors or connection of a start push button
  • Pre-assembled T-connector (proprietary 5-way bus) for connection to the base module and other expansion modules simplifies wiring and saves space in the switch cabinet

The output expansions extend the number of safe OSSD outputs in steps of two or four.

Up to 4 additional expansion units of the same type (e.g. input module) can be connected to the base module. This allows a maximum number of 16 safety outputs.

Technical drawing

1/1
Cat_MS_SAE_485_Auswerteeinheit_DRW1
Full screen
1/1

Article characteristics

  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Connection to base module
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Connection to base module propriertary 5-way bus (T-connector)
  • Electrical data
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Electrical data
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching current at safety output
  • Max. switching current at control output
  • Number of configurable electronic safety outputs
  • Number of electronic control outputs
  • Stop category 0 (STO) nach IEC 61800-5-2
  • Stop category 1 (SS1) nach IEC 61800-5-2
  • Start function
  • EDM/start input
  • Feedback circuit
  • Operating voltage min.
  • Operating voltage max.
  • Power consumption
  • LED display
  • Response time
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Max. switching voltage at safety output 24 V DC
Max. switching voltage at control output 24 V DC
Max. switching current at safety output 0.4 A 2 A
Max. switching current at control output 0.1 A
Number of configurable electronic safety outputs 2 4
Number of electronic control outputs 2 4 8
Stop category 0 (STO) nach IEC 61800-5-2 Depending on the configuration
Stop category 1 (SS1) nach IEC 61800-5-2 Depending on the configuration
Start function Depending on the configuration
EDM/start input Depending on the configuration
Feedback circuit Depending on the configuration
Operating voltage min. 19.2 V DC
Operating voltage max. 28.8 V DC
Power consumption 3 W 4 W
LED display four-coloured
Response time in Bericht eP Safety Designer ms 12 ms
  • Mechanical data
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Mechanical data
  • Dimensions
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Dimensions 108 x 22,5 x 114,5 mm (H/B/T)
  • Material information
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Material information
  • Housing material
  • Housing colour
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Housing material PA
Housing colour Gehäuse schwarz Frontplatte gelb
  • Environmental conditions
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Environmental conditions
  • Protection class, housing
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Relative humidity
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Protection class, housing IP20 DIN EN 60529
Operating temperature min. -10 °C
Max. operating temperature 55 °C
Min. storage temperature -20 °C
Max. storage temperature 85 °C
Relative humidity 10...95 %
  • Installation
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Installation
  • Mounting type
  • Weight
  • Torque for connection terminals
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Mounting type Mounting rail
Weight 170 g 185 g
Torque for connection terminals 0.6 N m
  • Connection
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Connection
  • Screw terminals
  • Pluggable connection terminals
  • Min. connection cross section
  • Max. connection cross section
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Screw terminals yes
Pluggable connection terminals yes
Min. connection cross section 0.5 mm²
Max. connection cross section 2.5 mm²
  • Approvals
  • 485EPA02
  • 485EPA04
  • 485EPA02S08
  • Approvals
  • Certified in accordance with
  • CE label
Attribute485EPA02485EPA04485EPA02S08
Bestellung
Bestellung
Certified in accordance with EN ISO 13849-1 IEC 61508 IEC 62061 UL 508 / CSA 22.2
CE label yes
1/1
485EPA_ordering_key
Full screen
1/1

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.