Axial angle sensor 424Z is optionally available with redundant output signal

Angle sensor 424Z

Axial angle sensor 424Z is the cost-effective version for angle measurement in the elobau product line. The 424Z is reduced to the minimum and foregoes a roller or ball bearing. Together with the option of a redundant output signal, this sensor is an interesting solution for performing safety-relevant measurement tasks, particularly in vehicle construction. The angle measuring range lies between 30° and 120°. Angle sensor 424Z is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life.

The sensor is typically used in steering axes of mobile machinery for measuring the wheel position.



  • The high protection class IP67 ensures reliable use in adverse environmental conditions
  • High temperature resistance from -40° to +85°C
  • Resolution 0.1°
  • Ratiometric output signal 0.5… 4.5 V
  • Redundant output signal available
424Z.... Product finder
operating voltage 5 V DC 0,5
output signal 0,54,5 V
current consumption 5 V -> 10 mA
angle rate 60
load resistance > 10 kΩ
centre position 2,5 V
reverse connection protected yes
delay time of output signal approx. 3 ms
temperature range -40+85C
protection class IP 67
resolution 0,1
cable PVC, 0,5 m 15 mm, 0,5 mm2
We use cookies for analysis and marketing purposes. By continuing to use this website, you agree to the use of cookies. Further information can be found in our data privacy policy. Please press the OK button if you want to view our policy. You can prevent cookies from being stored by adjusting your browser settings.