Axial angle sensor 424Z is optionally available with redundant output signal

Angle sensor 424Z…

Axial angle sensor 424Z is the cost-effective version for angle measurement in the elobau product line. The 424Z is reduced to the minimum and foregoes a roller or ball bearing. Together with the option of a redundant output signal, this sensor is an interesting solution for performing safety-relevant measurement tasks, particularly in vehicle construction. The angle measuring range lies between 30° and 120°. Angle sensor 424Z is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life.

The sensor is typically used in steering axes of mobile machinery for measuring the wheel position.



  • The high protection class IP67 ensures reliable use in adverse environmental conditions
  • High temperature resistance from -40° to +85°C
  • Resolution 0.1°
  • Ratiometric output signal 0.5… 4.5 V
  • Redundant output signal available
424Z.... Product finder
operating voltage 5 V DC ± 0,5
output signal 0,5…4,5 V
current consumption 5 V -> 10 mA
angle rate ± 60°
load resistance > 10 kΩ
centre position 2,5 V
reverse connection protected yes
delay time of output signal approx. 3 ms
temperature range -40…+85°C
protection class IP 67
resolution 0,1°
cable PVC, 0,5 m ± 15 mm, 0,5 mm2
Contact Japan