Angle sensor 424C 360

CAN angle sensor 424C.360

The 360° angle sensor 424C is used for angle measurements from 20° to 359° and is based on the contactless Hall measurement principle. This is extremely reliable and ensures a long service life. Due to the ball bearing, the pivot axis can absorb smaller radial forces and is therefore suitable for many applications in automation and vehicle construction where rotary movements of an axis must be detected.


  • 360° angle measuring range
  • Protection class of IP67
  • Operating temperature range from -40° to +85°C
  • CAN-bus connection (ISO 11898), available protocols: CANopen and SAE J1939
  • Optionally with actuation lever
  • Operating voltage 9…32 VDC


Available CAN protocols:

elobau’s J3 Fingertip joystick is also available as CANopen-capableSAE J1939-capable version of the J3 Fingertip joystick


424CO360 Product inquiry
operating voltage +9...+32 VDC
current consumption max. 70 mA
protection class IP 67 (DIN EN 60529)
temperature range -40C...+85C
CAN ISO 11898, CAN specification 2.0B
Protocol CANopen
terminating resistor no
baudrate 250 kbit/s
cycle time 100ms
angle 1 CW
angle 2 CCW
resolution 0,1 / Bit
linearity error < 1%
offset temperature drift < 0,002 / C
Contact United Kingdom
We use cookies for analysis and marketing purposes. By continuing to use this website, you agree to the use of cookies. Further information can be found in our data privacy policy. Please press the OK button if you want to view our policy. You can prevent cookies from being stored by adjusting your browser settings.