eloFlex Configurator | Imprint | Privacy Policy
  
Welcome to the eloFlex configurator.
You can configure your individual safety system step by step and send an inquiry.
At first, you need to choose your required Performance Level (PL). Afterwards, the safety inputs (contact types) can be defined, followed by their assignment to safety and control outputs: Depending on the choice, the safety inputs can be logically linked with the safety outputs. Each click on a checkbox activates other possible functions. Further information can be obtained by clicking on the underlined words.
Attention: Javascript has to be enabled in order to use this configurator!

Step 1:   Choose the required PL ( PLr )
PL d PL e

Step 2:   Safety inputs (each 2-channel) Step 3:   Assign and configure safety outputs Step 4:   Assign external contactor monitoring
  Input 1 Input 2 Input 3 Input 4 External contactor 1 External contactor 2
Contact type NO/NO / NC/NC Logic Switch-off / switch-on delay in s  automatic
 manual
 monitored
 automatic
 manual
 monitored
NO/NC
OSSD AND OR NAND NOR XOR XNOR NOT 2Hand  

Switch-off delay

Switch-on delay

Safety outputs 1

.

.

2 . .
3 . .
4 . .
                                             
          Step 5:   Assign and configure control outputs  
Logic Switch-off / switch-on delay in s
AND OR NAND NOR XOR XNOR NOT BTR Error =SO1 =SO2 =SO3 =SO4 Switch-off delay Switch-on delay
Control outputs 1 . .
2 . .
3 . .
4 . .

Company:* Address:* E-Mail:* Created by:* Project: Date: Quantity:* Batch size:*
Notes: (max. 200 characters)

*mandatory field