- Company
-
Products
-
Machine safety
Safe condition detection
Magnetically actuated safety sensors
Magnetically actuated safety sensors - roundMagnetically actuated safety sensors - rectangularEmergency stop buttons & contact elements
Emergency stop buttonsContact elements for emergency stop buttons
Safety interlocks
Actuators for safety interlocksAccessories for safety interlocks
Safe condition detection for potentially explosive gas and dust environmentsSafety sensors with ATEX approval
Safe signal evaluationSafety control units / Safety relays
Safety relays - slim designSafety relay - slim design with plug-in terminalsI/O modules: Interfaces for input expansion and output expansions
Intelligent interfaces for input expansionOutput expansion units -
Level measurement
Continuous level measurementFloat switches
Capacitive level measurement
Removal & dosing with integrated level measurement -
Sensors
Measuring angles and pitchTilt sensors
Angle sensorsAngle sensors 20-360°
Angle sensors 30-120°
Position detectionProximity switches (rectangular)
Rectangular proximity switch with reed contactMagnetoresistive proximity switchProximity switches (cylindrical)
Proximity switch in cylindrical design with reed-contactProximity switch in cylindrical design based on Hall sensorPneumatic cylinder switches
Pneumatic cylinder switches on reed-contact basisMagnetoresistive proximity switch for pneumatic cylinders
Position detection in potentially explosive areas -
Operator controls
Operate & controlJoysticks and multi-function handlesPush buttons
Ø 12 mm push buttons
Customer-specific products - General data
-
Machine safety
- Services
- News
- Jobs
- Contact
- Sensors
- Angle sensor 424A...A... ball or plain bearing
Angle sensor 424A...A...
The angle sensor 424A… is used for measuring angles in the range between 30° and 120°. The 424A… is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life.
The angle sensor is typically used for the position detection of levers and flaps in agricultural and construction machinery.
- The high protection class IP67 ensures reliable use in adverse environmental conditions
- High temperature resistance from -40° to +85°C
- Resolution 0.1°
- Current or voltage output signal
- Available together with actuation lever for simple connection
- Optionally with plain or ball bearing
- The angle sensor is equipped with a 3-pin AMP SuperSeal 1.5 plug
| 424A..A.... | Product finder |
| operating voltage | |
| output signal | |
| current consumption | |
| resolution | 0,1° |
| load resistance | |
| centre position | |
| reverse connection protected | yes |
| delay time of output signal | approx. 3 ms |
| temperature range | -40°C...+85°C |
| protection class | IP 67 |
| 424A.0A.... | Product finder |
| operating voltage | 10-30 V DC |
| output signal | 1-5 V |
| current consumption | 12 V -> 18 mA |
| resolution | 0,1° |
| load resistance | > 20 kΩ |
| centre position | 3 V |
| reverse connection protected | yes |
| delay time of output signal | approx. 3 ms |
| temperature range | -40…+85°C |
| protection class | IP 67 |
| 424A.1A.... | Product finder |
| operating voltage | 10-30 V DC |
| output signal | 4-20 mA |
| current consumption | 12 V -> 18 mA |
| resolution | 0,1° |
| load resistance | * |
| centre position | 12 mA |
| reverse connection protected | yes |
| delay time of output signal | approx. 3 ms |
| temperature range | -40…+85°C |
| protection class | IP 67 |
| 424A.2A.... | Product finder |
| operating voltage | 8,5 V DC |
| output signal | 4-20 mA |
| current consumption | 8,5 V -> 35 mA |
| resolution | 0,1° |
| load resistance | 200 Ω -> GND |
| centre position | 12 mA |
| reverse connection protected | yes |
| delay time of output signal | approx. 3 ms |
| temperature range | -40…+85°C |
| protection class | IP 67 |
| 424A.6A.... | Product finder |
| operating voltage | 4,5-5,5 V DC |
| output signal | 0,5-4,5 V ratiom. |
| current consumption | 5 V -> 8 mA |
| resolution | 0,1° |
| load resistance | > 20 kΩ |
| centre position | typ. 2,5 V |
| reverse connection protected | no |
| delay time of output signal | approx. 3 ms |
| temperature range | -40…+85°C |
| protection class | IP 67 |
| 424A.7A.... | Product finder |
| operating voltage | 10-30 V DC |
| output signal | 0,5-4,5 V |
| current consumption | 12 V -> 10 mA |
| resolution | 0,1° |
| load resistance | > 20 k |
| centre position | typ. 2,5 V |
| reverse connection protected | yes |
| delay time of output signal | approx. 3 ms |
| temperature range | -40…+85°C |
| protection class | IP 67 |
Contact Benelux
