elobau

Heavy duty joystick base for top mount J4


The angular operating range is ± 20°(± 15°). The operating principle is noncontacting: – analogue: rotating magnetic field over hall-sensor – discrete output: Reed technique Short circuit-proof with analogue version (short circuit duration: unlimited). J4 and J5 have a 6/8/10 or 12 PIN Molex 5557 connector. The electronic housing for CAN or PWM signals is fitted with an AMP 040 Multi-lock 8-pin connector. Alternatives on request. Forces on request. The static loading capacity (max. 190 mm from the point of rotation) is 2000 N in the x and y axis, and 700 N in the z axis. Lifetime of 8x106 operations corresponds to 2x106 elobau test cycles

Please use the button "productfinder" for defining one of these products.

 

Available CAN protocols

CANopen availableSAE J1939 available

J4........ Product finder
operating voltage
output signal
current consumption
load resistance
centre position
switching voltage
switching current
switching power
contact form
CAN-Bus and PWM signals
reverse connection protected yes
temperature range -25..+85°C with push button switches
-40...+85°C without push button switches
protection class electronics IP67
Contact UK
Joystick Configurator